Shafts and Joints – Strength & Endurance

  • 5 June, 2019
    Fatigue & Strength (SF&S)
    0
    Torsional Fatigue & Static test loadings are fully automated and closed-loop controlled by means of servo-electric or servo- hydraulic...
  • 5 June, 2019
    Endurance 4-square (E4SQR)
    0
    Based on 4-square principle and equipped with ENCOPIM’s Spinning Torque Actuator are intended to reproduce actual drive shafts operating...
  • 5 June, 2019
    High Speed Endurance (2mIL)
    0
    Fully servo-electric test rig applies torques in both directions while spinning in both directions as well (4-quadrant operation) to...
  • 5 June, 2019
    Quasistatic & Endurance 4-square (SQS&S)
    0
    Based on ENCOPIM’s Spinning Torque Actuator is intended to apply high toques at low speeds as well as to...

Servo-electric equipment intended to test side shafts and propeller shafts equipped with CVJ (Constant Velocity Joints) and Cardan Joints.

Back To Top